Tap Replacement in New Farm
Getting a tap replacement in New Farm sorted starts with one call to (07) 3524 7163. A licensed plumber runs the whole job, from the first look at the old fitting to the final leak test.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
Worn spouts and stiff mixers turn up all over this peninsula, from the 1980s-2000s walk-up flats to the houses on the ridge. We handle the swap as part of the tap and toilet work we run across New Farm and the streets nearby.
Mixer Taps and Separate Taps Compared
A mixer blends hot and cold inside the one spout, while separate taps pour each supply from its own outlet. Which style suits your place comes down to what the bench or basin already has.
Before either style goes in, the new tap has to suit what's under and around it:
The holes
How many the bench or basin carries, and how wide each one is, since a mixer body needs the right spacing.
The mounting
A wall spout draws from pipework inside the wall, so moving between wall and deck changes the wall as well as the tap.
The connections
The supply fittings beneath get matched to the new tap's inlets.
The isolation valves
One on each supply line lets us shut the water to that tap alone, without draining the whole house.
Tap Washers, Whole Taps and the Licence Line
Queensland requires a licence to swap a whole tap, and the QBCC's unregulated list leaves householders only the washer under a tap's cap, or its jumper valve. Even that small renewal must be done to standard.
The paperwork then splits by what the job is. A like-for-like swap counts as minor work, which needs a licensed plumber but neither a permit nor Form 4 paperwork. Installing a new tap, or moving one, lifts the job to notifiable work: the plumber reports it to the QBCC on a Form 4 within ten business days of finishing.
Renting adds a layer. A tenant needs the owner's or manager's yes in writing, recorded on a Form 23, before attaching any fixture, and that consent should carry a good reason if refused.
A tenant who fits a tap without that consent leaves the owner or manager three paths. The owner can call it a breach and work toward a resolution, keep it as an improvement, or take the fitting out and bill the tenant for the removal. If the tap only drips, repairs rather than a swap often sort it, and we say which way your tap points.
What the Labels on a Tap Box Mean
WaterMark certification is the testing pass mark: it shows a tap passed testing against Australia's plumbing code and its fitness-for-purpose rules. Registration under WELS (Water Efficiency Labelling and Standards) then gives the tap its stars and its water usage figure.
A licensed plumber cannot lawfully fit a tap without both marks, and WaterMark comes first in that order, since it precedes WELS registration. Business Queensland sets a floor of 3 WELS stars for showerheads and tap fittings, and states the floor does not apply to renovations.
Buying a tap online adds checks to the listing:
- The WaterMark trademark, the product specification and its licence number.
- The WELS registration details, plus the star count and water usage.
Both product databases can be searched by model name, and the seller can fill any gap before you pay.
What Changes the Price of a Tap Replacement
Five things move the price: the tap type, whether the isolation valves and connections can be reused, and whether the holes suit the new body. Access underneath and the number of taps going in finish the list. No single figure covers all of that, which is why we look first.
When a new or moved tap makes the job notifiable, the Form 4 lodgement fee lands with the contractor, who may pass that cost, admin included, across to the owner. Your fixed quote, given before any work starts, settles the figure with flat-rate pricing and no hidden fees.
Tap Flow Limits for Rental Properties
Queensland's water charging rules apply a flow test: internal cold taps and single mixers run at 9 litres per minute or less before a tenant can be billed for all water use. At the last census, 23.8 per cent of homes here were owned outright and 20.2 per cent carried a mortgage, which leaves most of the suburb rented, so the test matters on nearly every tap-out.
The test covers cold taps over a hand basin, the kitchen bench or a laundry tub, mixers included. It leaves out the bath, the garden tap and any tap feeding a washing machine or dishwasher.
Proof sits in plumbing reports, compliance certificates, receipts, the box the tap came in and its instruction manual. The wider charging rules live on our rental property page, and a running cistern wastes water too: our toilet repairs page covers the owner's duty there.
How We Fit Your New Tap
- 1
Describe the problem
Phone (07) 3524 7163 or fill in the form with what you're seeing in New Farm. The more we know, the better we can prepare.
- 2
We measure and match
We measure the old fitting, count the holes, confirm the mounting and the connections beneath, then shut each supply at its isolation valve before the swap.
- 3
Agree on the price
A fixed quote comes before any work starts: flat-rate pricing, no hidden fees, and your go-ahead first.
- 4
Pay on completion
Card or EFTPOS on site when everything's working, or ask us about Fix now, pay later.
Plumbing job in New Farm?
$0 call-out fees, available 24/7, and same-day where we can.
Tap Replacement Questions From New Farm
Call (07) 3524 7163Can I swap a tap myself at my New Farm place?
No, not the whole fitting. Queensland puts tap replacement on the licensed side of the line, and the only renewal a householder can attempt is the small valve under the tap's cap, done to standard.
Can I buy my own tap and have a plumber fit it?
Yes, once the tap carries the right marks. Check for the WaterMark trademark and a WELS rating before buying, because that certification is what lets a licensed plumber install the fitting lawfully.
How much does a new tap cost in New Farm?
The tap type drives most of it, then whether the existing valves and supply lines can serve again. You receive a fixed quote before any work starts, so the price is settled before we touch a tool.
What's the maximum flow rate for taps in a rental?
Queensland caps the tested taps at 9 litres per minute before a tenant can be billed for all water use. The test covers internal cold taps and single mixers over a hand basin, the kitchen bench or a laundry tub, and leaves out the bath, the garden tap and taps feeding appliances.
What should a new tap match on my basin?
The holes, the mounting and the connections underneath. We count the holes and their widths, note whether the old tap sits on the deck or the wall, and check the supply fittings before any new tap is chosen.
Call Us About Your Tap ReplacementWe'll call you back.
Phone (07) 3524 7163 for a licensed plumber in New Farm. We work under QBCC No: 15024607, with flat-rate pricing, no hidden fees and same-day where we can.
To claim your $0 call-out fee, call (07) 3524 7163 today.